VGA reversing camera with 6 IR night vision 5m + 150˚ angle of view is an universal solution for monitoring of reversing and blind spot. It gives you an overview of what is happening around the vehicle when it's moving or reversing. The reverse camera has night vision with 6 IR LEDs and 5 meters range. The camera has a wide range of use because it is suitable for larger cars, van, minibuses, buses, semi-trailers, trailers, farm machines, or trucks. It has 1/3 CMOS image sensor from SONY with VGA resolution. The camera is also equipped with a microphone that allows the driver in the cab not only to see the situation around the vehicle but also to hear it.
VGA universal reversing camera with night vision and microphone
The reverse camera has a scanning angle of up to 150°, what is sufficient range for reversing or monitoring the vehicle's movement in the areas where the increased safety attention is required. The reversing camera meets the highest degree of protection IP69, making it waterproof, dust-proof and resistant to mechanical damage. The body of the camera is protected with the durable aluminum alloy cover. The camera can be installed on different surfaces. Power supply of the camera and signal transmission is through a high-quality, unshielded 4-pin connector that has a waterproof finish that will make it easier for you to install. The camera is powered directly from the reverse monitor with a voltage of 12V.
The VGA reversing camera is only compatible with the VGA monitors that you will find in our offer.
Reverse camera for buses
6x LED IR night vision 5m
Durable body with aluminum alloy cover
Viewing angle up to 150°
IP69 waterproof, dust-proof and resistant to damage
Image sensor: SONY CMOS 1/3"
Minimum illumination: 0.1 LUX
IR night vision: yes 6 IR LEDs
Night vision distance: 5m
Viewing angle: 150°
IP protection degree: IP 69 waterproof, dust-proof, resistant to damage
Power consumption: 3W
Working temperature: -20 to 70° C
DC power supply: 12V
1x VGA reversing camera
1x Screws for mounting the camera