The reversing camera built into the brake light for the Volkswagen VW T5/T6 allows you to expand your car equipment with a reversing camera, which will ensure safely reversing and orientation in space. Waterproof camera with IP68 protection and 150˚ angle of view will allow you to park safely when reversing and moving in a problematic vehicle ride. It gives you an overview of what is happening around the vehicle when moving or reversing.
The camera is designed for built-in installation into vehicle bodywork for automotive rear view systems. No demanding installation or drilling in the body of car is needed. The parking camera will fit directly into place of the original part. The brake light remains functional because it fits exactly into the new part with the camera. If necessary, the camera can be adjusted vertically to the required angle. It is therefore a full-featured brake light with a built-in reversing camera. The built-in parking camera is suitable for Volkswagen VW T5/T6 cars. The 1/4" Sharp CCD image sensor delivers quality and sharp image transmission, and the built-in microphone lets you hear what is happening behind your van.
The reversing camera has a shooting angle of up to 150°, what is a sufficient range for the needs of reversing or monitoring the movement of the vehicle in an environment where is required increased safety attention. Power supply of the camera and transmitting the signal is through a quality, unshielded connector with a 4-pin connector, which has a watertight finish for easier installation. The camera is powered directly from the reversing monitor with voltage 12V. The camera is compatible with all VGA monitors in our offer because it also includes a reduction 4pin - cinch connector.
Reversing camera with full-featured brake light
Installation into vehicle body
Quality and sharp image transmission
Viewing angle up to 150°
CMOS 1/4" Sharp sensor chip
Lens diameter 1,7mm
Electronic shutter: 1/50 1/10000 sec.
Minimum lighting: 0.1Lux
TV system: PAL
Weather protection: IP68
Shooting angle: 150°
White balance: automatic
Working temperature from -30° C to + 70° C
1x Reversing camera
1x 10m 4pin cable
1x Connecting cable 4pin - cinch
1x Power cord