Product description
Working light FULL HD camera with 8 white LEDS work light with visibility up to 100 meters + IP68 protection and 130° viewing angle of camera. This powerful reversing camera from PROFIO ELECTRONICS is the right solution for monitoring the vehicle's surroundings. It gives you an overview of what is happening around the vehicle when it is moving or reversing. The reversing camera has working LED lights 8x with an afterglow of 100 meters. The camera has a wide range of uses, as it is suitable for larger cars, vans, minibuses, buses, semi-trailers, trailers, agricultural machines, or trucks. The FULL HD image sensor with a resolution of 1920x1080 pixels enables high-quality and sharp image transmission.
IP68 coverage guarantees resistance to water, mud, dust and mechanical damage
The reversing camera has a scanning angle of up to 130°, which is a sufficient range for the needs of reversing or monitoring the movement of the vehicle in an environment where increased attention is required in terms of safety. This FULL HD camera meets the IP68 degree of protection, which makes it waterproof, dustproof and resistant to mechanical damage. The body of the camera itself is protected by a durable case. The camera can be installed on various surfaces, which is made possible by the metal bracket, thanks to which you can tilt it and fix it in the desired position. The camera is powered and the signal is transmitted through a high-quality, shielded connector with a 4-pin ending, which has a waterproof treatment, which will facilitate your work during installation.
Features:
Reversing camera for large cars and industrial machines
8x LED - working light up to 100 meters
Durable camera body
Viewing angle up to 130°
IP68 waterproof, dustproof and damage resistant
Technical specification:
Model: PROFIO IKM963
Resolution: 1920x1080 pixels
Waterproof: yes
LED lights: 8x
LED type: 60° reflector 6000K
Range of LED lights: up to 100 meters
Protection: IP68
Viewing angle: 130°
Microphone: no
Power supply: DC10V-32V for LED lamp, DC12V for camera
Consumption: 2W and up to 10W when working in the dark
Dimensions: 10,6x5,2 cm, diameter 9 cm
Connector: 4pin
Package contents:
1x Reversing camera
1x Manual
