FULL HD reverse camera with 6 IR night vision 5m + 150° angle of view is an universal solution for monitoring when reversing and blind angle (blind spot). It gives you an overview of what's going on around the vehicle when it's moving or reversing. The reverse camera has night vision with 6 IR LEDs and 5 meters range. The camera has a wide range of uses because it is suitable for larger cars, van, minibuses, buses, semi-trailers, trailers, farm machines, or trucks. The 1/3 CMOS image sensor from SONY with FULL HD 1920x1080 resolution provides high-quality and sharp image transmission. The camera is also equipped with a microphone that allows the driver in the cab not only to see the situation around the vehicle but also to hear it.
The new generation of reverse cameras in the FULL HD 1920x1080p resolution on the market.
The reverse camera has a scanning angle of up to 150°, what is sufficient range for reversing or monitoring the vehicle's movement in the areas where the increased safety attention is required. The FULL HD camera meets the highest degree of protection IP69, making it waterproof, dust-proof and resistant to mechanical damage. The body of the camera is protected with the durable aluminum alloy cover. The camera can be installed on different surfaces. Camera power supply and signal transmission is through a high-quality, unshielded 4-pin connector that has a waterproof finish that will make it easier for you to install. The camera is powered directly from the reverse monitor with a voltage of 12V.
The FULL HD reverse camera is only compatible with the touch HD and AHD monitors which you can find in our offer.
Reverse camera for buses
6x LED IR night vision 5m
Durable body with aluminum alloy cover
Viewing angle up to 150°
IP69 waterproof, dust-proof and resistant to damage
Image sensor: SONY CMOS 1/3"
Resolution: FULL HD 1920x1080
Minimum illumination: 0.1 LUX
IR night vision: yes 6 IR LEDs
Night vision distance: 5m
Viewing angle: 150°
IP protection degree: IP 69 waterproof, dust-proof, resistant to damage
Power consumption: 3W
Working temperature: -20 to 70° C
DC power supply: 12V
1x FULL HD reverse camera
1x Screws to attach the camera