Bug detector for locating GSM 3G/4G LTE, Bluetooth and WiFi signals

The best bug detector for locating GSM 3G/4G LTE, Bluetooth and WiFi signals represents a new class of anti-tracking hidden devices. Unlike standard search devices, it can find hidden devices at a long distance, such as Bluetooth and Wi-Fi bugs. Such bugs, especially Bluetooth-type, are practically undetectable by conventional radio frequency detectors, because of the low level of radiation and the type of modulation. This GSM detector uses a separate channel with high (2,44 / 5,39 Ghz) frequency and sensitivity to find Bluetooth and Wi-Fi devices. The detector then processes the demodulated signal to determine what protocol was found. Of course, the detector also finds “classic” bugs (GSM, 3G, 4G, 5G DECT, etc.). The innovative device is not just an improved model of conventional detectors, but a brand new and revolutionary search device.

The detector is equipped with main functions

The broadband antenna (for the ANT1 socket) provides wider coverage, especially at lower frequencies, allowing the detection range of conventional VHF/UHF bugs to be increased while maintaining superior sensitivity in higher bands (GSM, Wi-Fi, Bluetooth).

Antenna (for ANT2 socket) with 2 to 4 times more sensitivity for all sources above 2GHz (Wi-fi 2.4Ghz, 5GHz, Bluetooth, Wi-Max, LTE High, etc.) The unit can find the source of the broadcast signal and accurately locate it.

Magnetic signal detector - install the magnetic probe, turn on the device and press the magnetic detection button. After the LED indicator lights up, start searching. When a magnetic source is found, a white LED lights up and you can hear the audio signal.

RF/MAG switch - after switching to the MAG option, set the sensitivity to maximum. Install the magnetic antenna and adjust the potentiometer. Due to high sensitivity, the detector may be affected by geomagnetism and iron objects. Use the rotary knob to set the sensitivity to the specified environment.

The ANT1 channel (1) is used to detect a wide range of 50-6000 MHz frequencies to search for all types of transmitters in rooms, cars, devices worn on the body, telephones or other types with different modulation methods, including the following bands: VHF, UHF, GSM 900/1800/1900 MHz, 3G, Wi-Fi, Wi-Max, 4G (LTE), etc.

The second ANT2 channel (2), marked as "2,44 GHz 5,39 GHz", is used to detect only Bluetooth and Wi-Fi (or other signals with the same frequencies), but with a higher sensitivity. A classic search method is to use an ANT1 antenna, i.e. 50 - 6000 MHz, first to cover a wide area of frequency ranges. Then the area scan procedure should be repeated with ANT2. Using the ANT1/ANT2 buttons you can switch between ANT1 and ANT2.

MODE - after pressing you can set the desired display mode. SOUND SIGNALIZATION - if any source is found, you will hear a sound signal from the speaker. VIBRATION MODE - it alerts you by vibrations when the source is found. SILENT MODE - no sound and no vibrations. The sound signaling allows for quick search,  and according to the specific sound the experienced operator can recognize the source. 

Using the detector in everyday life

If the device emits a signal but there are no radiation sources nearby, there are 3 possibilities

1. Your own communication device is paired with the base station.
2. The suspect source is very close.
3. You are too close to the wireless router

Specifications:

• Communication range50MHz - 5,4GHz
• Dynamic range detection-50dBm-10dBm
• Detection sensitivity<0.03mw
• Detection power1,2GHz wireless camera: 36m² // 2,4GHz: 25m²
• Mobile signal2G, 3G, 4G 25m²
• Magnetic50mm ~ 150mm
• Indication method20 LEDs - light/sound indication
• Battery3,7V 1500mAH
• Operating time20 - 45 h
• Dimensions12,5 cm (height) x 5,2 cm (width) x 2,2 cm (thickness)
• Weight195g

Package contents:

• 1x Detector
• 2x Antenna
• 1x Magnetic probe
• 1x Micro USB cable
• 1x Manual