Wireless Reversing Camera with 15 IR LEDs + 7" LCD Monitor is ideal parking assistant with which you will have a overview about what is happening behind the vehicle, if you are far enough from obstacles or other vehicles.
Wireless Reversing Camera with 15 IR LEDs + 7" LCD Monitor is ideal parking assistant with which you will have a overview about what is happening behind the vehicle, if you are far enough from obstacles or other vehicles. This complete reversing set will make parking asier, it has a camera with a wide angle of view 120 degrees and powerful 15 IR night LEDs with which you will be able to see clearly at night.
Product features:
2.4GHz wireless video transmission
Real-time view of the reversing camera
7 "inch TFT color LCD display
1,3 M Effective pixels of image sensor
Waterproof, resistant to weather conditions
Night vision - 15 IR LED
120 ° wide viewing angle
Compact design and easy installation
Product Specifications:
LCD monitor (wireless receiver):
Display: TFT 7 "
Effective pixels: 480 * 234
Video system: NTSC & PAL
Power supply: DC 12V 1,5A
Transmission frequency: ISM 2,400 MHz ~ 2,485 MHz
Transmission distance in open space: 100 m
Dimensions: 190 mm * 140 mm * 20 mm
Weight: 300 g
Reversing camera:
Image sensor: CMOS 1/3
Video standard: PAL: 628 (H) * 582 (V) NTSC: 510 (H) * 492 (V)
Horizontal resolution: 380 TV lines
Minimum illumination: 0Lux/F1.2 (IR LED ON)
Angle of view: 120 °
Signal system: PAL / NTSC
Power supply: DC 12V
Package includes:
1 * Reversing Camera
1 * 7 "LCD monitor receiver
1 * Stand for LCD monitor
1 * AC/DC power supply for LCD monitor
1 * User manual
Do you have questions about product?
Ask in discussion
Hello, I could not find the length of the camera's power cable in the description of the camera's parameters. I would like it if you added it to the product specification. Thank you Jirka
Good day,
We apologize for the missing information. The camera's power cable is approximately 160 centimeters long.
Good day. Is it possible to connect the camera to the power supply from the car cigarette lighter so that it still works? I have a leased car and I can't interfere with the electrical system. Thank you for the answer
Good day,
Yes, it is possible to make a cigarette lighter end on the camera, but unfortunately this end is not part of the package. Also, if you have no experience with connecting such an end, a mechanic or electrical engineer would have to make it for you. You would also have to run the power cable through the vehicle to the camera.
Hello, since I often need to transfer the camera to several cars, is it possible to make the power supply so that I have a "male" at the end of the cable and attract it to the "female" through the socket in the towing device? /or is it necessary to pull some more cable into the cabin?
Thank you for your response
George
Good day.
The camera only needs to be connected to a power source. You can solve it with any coupling through which electricity can pass. current and the camera can thus be powered. There is no need to run any other cable into the cabin for video transmission, because the camera works via Wifi connection. It is only necessary to connect the camera to the power supply.
Hello, in the description of the reversing set parameters, it is stated that the camera has a 12V and 24V power supply. Does the same also apply to the monitor for which this is not stated? Otherwise, the use of the whole set in on-board truck systems that do not use a 24V to 12V converter would be problematic to say the least.
Thank you for answer.
Good day,
The monitor is powered by 12V, but it is powered via a cigarette lighter adapter. This adapter has a built-in converter that can be powered from 12V to 30V. So you can also connect the monitor to 24V using this adapter.
Overview of the reversing space is only available when reverse gear is engaged ?? Is it possible to connect non-stop - monitoring of the space behind the vehicle??
Good day,
Yes, it is possible. The reversing camera is connected to the reversing lights so that the camera is activated when reverse gear is engaged, but if you connected the camera to, for example, the rear daytime running lights, the camera would work constantly.
Hello, does the camera have to show the track or the future possible position of the car? Or. can it be deleted?
Thank you
The car track indicator cannot be turned off on the camera. This function is part of the reversing camera.
Hello, what program do I need to use to be able to use an android smartphone to display. Thank you mxktm@centrum.cz
Good day,
We are sorry, but the device emits a wifi signal, but this signal is not like a classic wifi network that you can connect to. This Wi-Fi connection is provided by a built-in transmitter and receiver (so-called receiver), which transmits the image wirelessly at the same frequency as the Wi-Fi network.
The camera transmits a video signal via wifi???? Or is it necessary to connect the camera with a cable from the back to the cabin? Is it powered by the reversing lights?
Hello, you connect the camera to the reversing lights. You connect the monitor to the car cigarette lighter. As soon as you engage the reverse gear, the reverse lights are activated (ie the camera receives power) and at the same time the LCD monitor is activated to display the image from the camera. The wifi range should be sufficient.
Is the reversing camera display also waterproof. I want to use it on a tricycle. Thank you. Olda.
Good day,
Sorry, but the monitor is not waterproof.
Good day,
most of the system components are powered by 12 to 24V, only the monitor has 12V. What about the monitor's power supply?
Good day,
The monitor is powered by 12V from the adapter to the car socket. The adapter is powered by an input voltage of 12-24V, which reduces it to an output voltage of 12V to power the monitor.
